Common Electrical Concerns And Possible Solutions

Whenever a house or office experiences a power outage, electricians are qualified to troubleshoot the problem. Tripping over wires in the home or tripping over a tripping hazard in the wall is not uncommon. So it’s safe to assume that the chances of tripping are pretty standard, and some accidents occur each day. To prevent accidents, you must learn to recognize some common electrical hazards and how to avoid them.


Electrical concerns like tripping over power lines should be addressed as soon as possible. When this happens, the utility company must be called to either repair the wire cut or perform emergency service. In addition, if you are using electricity from more than one meter in your home, tripping will occur whenever the electricity changes hands. Therefore, any meter readings must be different from usual be investigated to ensure no other electrical system problems.

Faulty Appliances: Most people take for granted that their television, air conditioner, fridge, and other regular appliances are working correctly. They seldom consider the possibility that their electricity might be going to incorrect settings, causing an electrical problem. Most often, this is due to a fault within the wiring. It could be that two wires are crossing each other or that a wire is touching a conductive metal surface. If these things are the case, it’s wise to consult a licensed electrician right away to ensure that everything is working correctly.

Flickering Lights: If your lights are flicking on and off all the time, you have one of many electrical concerns. The first thing to check is the light switch. It’s almost always the case that the button is the cause of the problem. However, if the light is flicking on and off randomly, the switch could be tripped by a circuit breaker that is improperly installed. Home repair or replacement help can fix this quickly.

Low Wattage Or surges: If your electricity bills continuously increase, it might be a sign of low wattage and high voltage. Low-wattage appliances draw less electricity, which means they use less energy than more powerful ones. However, when a surge in current arrives, it can overwhelm the machine, causing it to draw far more electricity than it’s intended to handle. This can result in a gradual increase in your electricity bills, making it difficult to avoid the rise in the account even if you’re doing everything you can to reduce your usage.

Short Circuit In The Light switches: If you find that your lamps or ceiling fans switch colors or flicking, it could be an issue with your lighting equipment. Some light switches are made to trip on a three-pronged clip, which means they can trip over a three-pronged wire. Other times, the cables could be short-circuited, which means electricity is running in the wrong direction. This can not only cause your lights to flash but can also potentially trip your home’s circuit breaker. Changing your wiring immediately is the best way to prevent a short circuit.

Light Bulbs: The most common electrical problem encountered in homes is broken light bulbs. Bulbs that have been improperly replaced or mismatched with new ones can result in a lot of wasted energy, making running your lighting fixtures very expensive. Replacing a light bulb can be an easy fix that doesn’t require any work; however, it’s essential to make sure you replace the bulb according to the instructions included with your fixture.

Exposing Wires To The Air: Many people mistakenly think that electrician’s tape safely covers them when working with electrical wires. However, taping around exposed wires is not enough to prevent electric shock or electrocution. Electricians tape only covers exposed wires, which offer little protection. Electrocution is a serious issue and can result in death if an exposed wire is tripped. Exposing exposed wires to the air is a much safer alternative.